Civil Construction

1. PROJECT CONTENT

2. PROJECT THEME

The project consists in some elements of design for a building that can have one of the following destinations: block of flats; hotel; students accommodation building. The building has UG+G+4Fl and it is placed in urban area on a land with the natural slope of 2% and connected to the city services facilities.

The structure will have:

- pedestrian or non pedestrian reinforced concrete flat roof;

- monolithic or precast reinforced concrete shear walls combined with lamellar frames;

- reinforced concrete floor slabs and stairs;

- elastic cross beam or mat concrete foundations under the load bearing walls and columns.

- The envelope of the building consists of:

- load‐bearing walls of reinforced concrete or non load‐bearing walls of hollow brick or cellular concrete block masonry protected on the external face with al layer of efficient thermo insulating materials (fireproofed expanded polystyrene for face wall, mineral wool rigid plates, extruded polystyrene etc.);

- ventilated or un‐ventilated could (insulated) terrace roof;

- the ground floor plate over unheated basement will be insulated on the ceiling of the basement;

- the doors and windows can be of multi‐layer wood or PVC profiles with thermal insulating double or triple glassed window panels with Low CTE float glass. The windows will be provided with ventilating systems or with three opening positions in order to provide a adequate thermal protection and natural ventilation of the indoor space;

- the staircase is insulated and heated. The project must contain information and details about:

- the type and the composition of structural and for envelope elements ( walls, columns, floors, foundations, and roof);

- the joints of the main structural and for envelope elements;

- the heat conservation capacity of the building;

- the structural performance under the load combination that contain dead, snow, live loads and seismic action.

The thermal and structural design and the constructive details of the elements already mentioned.

3. TECHNICAL REPORT

3.1 General data

CONSTRUCTION: MULTI‐STOREY BUILDING Designer: Ursachi M. Razvan

Height Regime: UG+G+4Fl Address: FAGARAS

Site characteristics

The site is situated in Fagaras, in the eastern part of the city. The site has an insignificant slope. The field has a local and general stability assured by respecting the instructions from the geotechnic study.

The destination of the building: block of apartments; hotel; hostel building for students. The placement has access to public utilities (water, sewerage, electricity).

- The land satisfies all the conditions to be built in, and stable;

- The foundation will over cross the freezing cote 0.9m;

- Land slope ‐ 2 %;

- Seismic zone ;

- The snowing 2.0kN/m2 ;

- The climate region – IV zone; Te=‐21oC 3.2.Urbanism conditions

- Water supply will be made by joining the water network having the authorization obtained from S.C. APAPROD S.A., FAGARAS

- Electricity supply will be made having the autorization obtained from „E.ON, FAGARAS S.A.”

- The sewerage will be made by joining the sewerage network from the neighbourhood .

- The heating will be made individually by central heating.